LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 848 (5.7L - DTCS P1456 To P2302 - 1500) >> Diagnosis And Testing >> P2127-Accelerator Pedal Position Sensor 2 Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
5-VOLT SUPPLY CIRCUIT OPEN OR SHORTED TO GROUND
APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO GROUND
APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO THE APP SENSOR 1 RETURN CIRCUIT
APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO THE APP SENSOR 2 RETURN CIRCUIT
APP SENSOR 2 SIGNAL CIRCUIT OPEN/HIGH RESISTANCE
APP SENSOR 2 GROUND CIRCUIT OPEN/HIGH RESISTANCE
APP SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .