Hose, Crankcase Breather: Installation: Installation

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankcase Vent Heater, Air Inlet Hose, Breather Hose & Connector

Courtesy of CHRYSLER GROUP, LLC

Connect the CCV hose (1) to the intake air tube (3).
Connect the CCV hose wire heater harness connector (4).

Fig 2: Fuel Injector Silencer, Intake Manifold Insulator & Breather Hose
Courtesy of CHRYSLER GROUP, LLC
Connect the breather hose (3) to the timing cover.

Fig 3: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Install the engine cover (1).
Connect the negative battery cable.