LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 809 (Emissions Control - 1500) >> Diesel Exhaust Fluid Emissions >> Fitting, Quick Connect >> Standard Procedure >> Standard Procedure - Quick-Connect Fittings >> Connecting

Standard Procedure - Quick-Connect Fittings: Connecting

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the quick-connect fitting body and Diesel Exhaust Fluid (DEF) system components for damage. Replace as necessary.
  2. Prior to connecting any quick-connect fitting to components, check condition of fitting and components. Clean parts with a lint-free cloth. Lubricate with clean engine oil.
  3. Insert the quick-connect fitting onto the DEF system component until the built-in stop on the line or component rests against the back of fitting.
  4. Continue pushing until a click is felt.
  5. Verify a locked condition by firmly pulling on the quick-connect fitting connection of the fuel system component.
scientia non olet · About LEMON Manuals