LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Body - Interior & Exterior) >> Winch >> Diagnosis And Testing >> Diagnosis And Testing - Winch >> Motor Test

Motor Test

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

If the motor is suspected to be failing check the following:

  1. Disconnect the motor power connectors F1, F2 and A.
  2. Measure the resistance between F1 and F2. Resistance should be less than 1?.
  3. Measure the resistance between A and ground. Resistance should be less than 1?.
  4. If the resistance is greater than 1? the motor brushes could be worn or the internal wiring could be burned. Replace the motor. Refer to MOTOR, Winch, Removal .
scientia non olet · About LEMON Manuals