Repair Procedure For Back-Glass/Power Slider
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Parts Required:
- Mopar® Glass Sealer
- For the back-glass drains (1) being plugged or restricted the back-glass will have to be removed and replaced.
- If the water leak is found around the parameter of the back-glass due to urethane skips it is recommended to apply Mopar® Glass Sealer.
- Water test area inspecting for water entering vehicle. If water still enters vehicle, back-glass will have to be replaced.