LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Body - Interior & Exterior) >> Diagnosis And Testing >> Water Leaks >> Methods Of Testing >> Method 1

Method 1

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

With a person inside the vehicle, run water around windshield starting at the lower left or right side A-Pillar slowly moving up the A-pillar and watch for water to drip inside the vehicle from A-Pillar and/or Grab Handle. Next, move across the top of the windshield. If water is seen dripping from any area, stop running water and proceed with the applicable repair procedure below.