LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (3.7L/4.7L/5.7L - DTCS P0850 To P2173 - NGC - 1500 & 2500) >> Diagnosis And Testing >> P2127-Accelerator Pedal Position Sensor 2 Circuit Low >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

When the APP Sensor No. 2 voltage is too low. Engine will only idle if the Brake pedal is Pressed or has failed. Acceleration rate and Engine output are limited. One trip fault and the code will set within 5 seconds. ETC light is flashing.

scientia non olet · About LEMON Manuals