LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 769 (Fuel System - 1500) >> Fuel Delivery, Diesel >> Rail, Fuel >> Removal >> Right Fuel Rail

Right Fuel Rail

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the right bank fuel tubes. Refer to TUBE(S), FUEL, REMOVAL .
  3. Disconnect the fuel pressure sensor harness connector (1).
    Fig 1: Fuel Rail Pressure Sensor Connector
    GC0146823Courtesy of CHRYSLER GROUP, LLC
    Fig 2: Right Fuel Rail & Bolts
    GC0146821Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts (2) and the right fuel rail (1).