3.0L Diesel Dual Exhaust
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Saturate the tailpipe tip clamp nuts (3) with spray lubricant. Allow 5 minutes for penetration.
- Loosen the exhaust tailpipe tip clamp nuts (3) and remove the exhaust tailpipe tips (1).
- Saturate the muffler exhaust clamp nuts located on the muffler assembly (3) with spray lubricant. Allow 5 minutes for penetration.
- Loosen the muffler exhaust clamp nuts located on the rear muffler assembly (3).
- Pull the exhaust tailpipes off the isolators (2) and remove the exhaust tailpipes (1) from the dual outlet muffler assembly (3).