Belt, Serpentine: Removal: 3.0L

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect negative battery cable.
Remove the engine cover (1).
Remove the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL .
Remove the electric vacuum pump. Refer to PUMP, ELECTRIC VACUUM, REMOVAL .
Remove fasteners and position aside the resonator.

Fig 2: Vibration Damper Cover & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the front harmonic vibration dampener cover (1).

Fig 3: Identifying Belt Tensioner & Belt
Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Do not let tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
Rotate belt tensioner (7) until it contacts its stop. Remove belt (2), then slowly rotate the tensioner (7) into the freearm position.