LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (3.7L/4.7L/5.7L - DTCS P0196 To P0501 - NGC - 1500 & 2500) >> Diagnosis and Testing >> P0340-Camshaft Position Sensor Circuit >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

At least 5 seconds or 2.5 engine revolutions have elapsed with crankshaft position sensor signals present but no camshaft position sensor signal. One Trip Fault. Three good trips to turn off the MIL.