LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 736 (6.7L Diesel - DTCS P0008 To P040D - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0016-Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1 >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

While engine is running. The Powertrain Control Module (PCM) monitors the position of the notch on the crankshaft speed sensor target and the camshaft speed sensor target. If the two positions do not match, the PCM then determines that there is a mechanical mis-alignment between the two sensors.

scientia non olet · About LEMON Manuals