LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (6.4L - DTCS P2320 To U1449 - 2500 Hd, 3500 Hd) >> Diagnosis And Testing >> U11BC-Lost Brake Switch Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) doesn't receive a brake switch signal from the Anti-lock brake Module over the CAN C bus. One Trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals