LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics - 2500 Hd & 3500 Hd)) >> Diagnosis And Testing >> C147B-Front Axle Disconnect Sensor Circuit Performance >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(F946) FUSED IGNITION RUN/START CONTROL OUTPUT CIRCUIT OPEN OR HIGH RESISTANCE
(G303) FRONT AXLE LOCK SIGNAL CIRCUIT SHORTED TO VOLTAGE
(G303) FRONT AXLE LOCK SIGNAL CIRCUIT OPEN
(G303) FRONT AXLE LOCK SIGNAL CIRCUIT SHORTED TO GROUND
(G304) FRONT AXLE LOCK CONTROL CIRCUIT OPEN
(G304) FRONT AXLE LOCK CONTROL SHORTED TO VOLTAGE
(G304) FRONT AXLE LOCK CONTROL CIRCUIT SHORTED TO GROUND
(Z908) GROUND CIRCUIT OPEN
(Z908) GROUND CIRCUIT SHORTED TO VOLTAGE
FRONT AXLE DISCONNECT (FAD) MODULE
DRIVE TRAIN CONTROL MODULE (DTCM)
NOTE:

Before performing the following diagnostic test, please perform the intermittent conditions and wire harness procedure.