LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Anti-Lock Brake System (Abs) (Service Information)) >> Electrical >> Diagnosis and Testing >> Diagnosis And Testing - Electrical

Diagnosis And Testing - Electrical

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Diagnosis of base brake conditions which are mechanical in nature should be performed first. This includes brake noise, lack of power assist, parking brake, or vehicle vibration during normal braking.

The antilock brake system performs several self-tests every time the ignition switch is turned on and the vehicle is driven. The Antilock Brake Module (ABM) monitors the system inputs and outputs circuits to verify the system is operating properly. If the ABM senses a malfunction in the system it will set a DTC into memory and trigger the warning lamp.

NOTE:

A scan tool must be used to diagnose the Antilock Brake system.

scientia non olet · About LEMON Manuals