LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 695 (Power Distribution - 2500 Hd & 3500 Hd) >> Outlet, Power, 12 V >> Removal >> Removal

Outlet, Power, 12 V: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inserting Power Outlet Remover
GC0143808Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Look inside and note position of the retaining bosses (2).
  3. Insert the (special tool #10246, Remover, Power Outlet) (1) into the retaining bosses (2) of the power outlet.
  4. Pull out the base through the mounting ring by gently rocking the tool.
    Fig 2: Power Outlet & Connector
    GC0143809Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the harness (1) from the power outlet (2).
  6. Set the base aside and remove the base mount ring.
scientia non olet · About LEMON Manuals