LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Final Drive Control Module (FDCM) - Electrical Diagnostics) >> Diagnosis and Testing >> C2311-Stabilizer/Differential Indicator Supply Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
DISCONNECTING STABILIZER SWITCH
(T536) SWITCH SUPPLY CIRCUIT SHORTED TO VOLTAGE
T536) SWITCH SUPPLY CIRCUIT OPEN
(T532,T533 or T534) LOCKER ILLUMINATION SENSE CIRCUIT SHORTED TO VOLTAGE
(T532,T533 or T534) LOCKER ILLUMINATION SENSE CIRCUIT OPEN
FDCM
scientia non olet · About LEMON Manuals