LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 689 (Frame And Bumpers - 2500 Hd & 3500 Hd) >> Bumpers >> Fascia, Front >> Removal >> Upper

Fascia, Front: Removal: Upper

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wheelhouse Splash Shield & Push Pins
GC0088224Courtesy of CHRYSLER GROUP, LLC
NOTE:

Sport fascia shown in the illustration, upper fascia similar.

  1. Remove the push pins (3) and position the wheelhouse splash shield (2) aside.
    Fig 2: Screws, Fascia & Fender
    GC0088225Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Sport fascia in the illustration, upper fascia similar.

  2. Remove the fender screws (1).
    Fig 3: Removing/Installing Upper Fascia
    GC0088226Courtesy of CHRYSLER GROUP, LLC
  3. Remove the grille. Refer to GRILLE, REMOVAL .
  4. Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the upper clips and remove the fascia (4).