Fascia, Front: Removal: Sport

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wheelhouse Splash Shield & Push Pins

Courtesy of CHRYSLER GROUP, LLC

Remove the push pins (3) and position aside the wheelhouse splash shields (2).

Fig 2: Screws, Fascia & Fender
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (1) and separate the fascia (3) from the fender (2).

Fig 3: Removing/Installing Sport Bumper Lower Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the four lower fasteners (2).

Fig 4: Removing/Installing Upper Clips And Sport Fascia
Courtesy of CHRYSLER GROUP, LLC
Remove the grille. Refer to GRILLE, REMOVAL .
Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the upper clips and remove the fascia (4).