2500 - 5500 Heavy Duty

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Bumper Electrical Connectors & Nuts

Courtesy of CHRYSLER GROUP, LLC

Remove the front wheel liners. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
Remove the grille. Refer to GRILLE, REMOVAL .
Disconnect the electrical connectors (1), if equipped.
Remove the eight nuts (2) and remove the bumper.

Fig 2: Front & Rear Push Pins
Courtesy of CHRYSLER GROUP, LLC
Remove the rear (1) and the front (2) push pin fasteners.

Fig 3: Front Shroud & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the four fasteners (2) and remove the front shroud (1).

Fig 4: Rear Shroud & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the four fasteners (1) and remove the rear shroud (2).

Fig 5: Upper Charge Air Cooler Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the two upper charge air cooler bolts (1).

Fig 6: Bracket & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the bracket bolts (1) and the two brackets (2).
Position the charge air cooler aside.

Fig 7: Tow Hook, Bolt & Nut
Courtesy of CHRYSLER GROUP, LLC
Remove the nuts (1) and bolts (2) and remove the tow hooks (3), if equipped.

Fig 8: Bumper Bracket Support Nuts
Courtesy of CHRYSLER GROUP, LLC
Remove the bumper bracket support nuts (1).

Fig 9: Bolt Assembly & Charge Air Cooler
Courtesy of CHRYSLER GROUP, LLC
As necessary, position aside the charge air cooler (2).
Remove the bolt assemblies (1).

Fig 10: Frame Tip & Bumper Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove the bumper brackets (2) from the frame tips (1).