LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 664 (Audio (Radio) - Electrical Diagnostics - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> B223B-00-Vehicle Configuration Mismatch >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DIAGNOSTIC TROUBLE CODE (DTC) 

NOTE:

Diagnose and repair any BCM VIN or Communication DTCs before continuing with this test.

  1. Turn the ignition on.
  2. With the scan tool, read DTCs.

    Does the scan tool display this DTC as active?

    Yes 

    • Verify the correct vehicle configuration is programmed in the BCM.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    No 

    • Use the scan tool to read DTCs in all other modules. If any communication DTCs are present, perform the appropriate diagnostic procedure. Perform any Technical Service Bulletins that apply. If no problems are found, test is complete.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals