Center Seat Storage Mounted

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The four retaining tabs on the rear of the media hub must be compressed for removal.

Disconnect and isolate the negative battery cable.
Remove the front center seat cover. Refer to DESCRIPTION .

Fig 1: Media Hub Wire Harness Connectors & Retaining Tabs
Courtesy of CHRYSLER GROUP, LLC
Disconnect the wire harness connectors (1) from the media hub.
Compress the four retaining tabs (2) to release the media hub from the front seat storage tray.