Console Mounted

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Media Hub Wire Harness Connectors & Retaining Tabs

Courtesy of CHRYSLER GROUP, LLC

Insert the media hub into the inner tray of the storage bin.
Securely engage the four plastic retaining tabs (3).
Connect the wire harness connectors (1, 2).

Fig 2: Inner Tray Retaining Screws
Courtesy of CHRYSLER GROUP, LLC
Align the inner tray to the floor console.
Install and securely tighten the seven inner tray retaining screws (1).
Position and install the rubber mat.
Connect the negative battery cable.