Sensor, EGR Temperature: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover, Bolts & Oil Dipstick

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate both negative battery cables.
Remove the engine oil dipstick (2).
Remove bolts (1) and the engine cover (3).

Fig 2: EGR Temperature Sensor
Courtesy of CHRYSLER GROUP, LLC
Disconnect EGR Temperature Sensor (1) harness connector (2).
Remove EGR Temperature Sensor (1) from EGR tube (6).