Crankcase Pressure Sensor 2

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover, Bolts & Oil Dipstick

Courtesy of CHRYSLER GROUP, LLC

Disconnect both negative battery cables.
Remove the engine oil dipstick (2).
Remove bolts (1) and the engine cover (3).

Fig 2: Crankcase Pressure Sensor Wire Harness Connector & Clamp
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Crankcase Pressure Sensor wire harness connector (1).

Fig 3: Crankcase Pressure Sensor & Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove bolt (2) and the Crankcase Pressure Sensor (1).