LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 657 (Emissions Control - 2500 Hd & 3500 Hd) >> Diesel Exhaust Fluid Emissions >> Line, Diesel Exhaust Fluid Supply >> Installation >> Installation

Line, Diesel Exhaust Fluid Supply: Installation: Installation

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Diesel Exhaust Fluid Supply Line & Injector Wire Harness Connector
GC0155206Courtesy of CHRYSLER GROUP, LLC
  1. Install the Diesel Exhaust Fluid (DEF) supply line (1) and connect to the dosing injector.
  2. Connect the supply line to routing clip.
    Fig 2: DEF Supply Line, Connector, & Pump
    GC0155409Courtesy of CHRYSLER GROUP, LLC
  3. Connect the supply line (3) to the DEF pump (2).
  4. Disconnect the DEF supply line heater wire harness connector.
  5. Install the DEF pump shield.
  6. Lower the vehicle.
  7. Connect both negative battery cables.
scientia non olet · About LEMON Manuals