Jet, Piston Oil Cooler: Removal: Removal
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use caution when removing and installing oil jets. Damage to oil jet nozzle could cause severe engine damage. Care must be taken not to damage the crankshaft tone ring when removing cylinder number four oil jet.
NOTE:
To prevent damage to the oil jets, remove the oil jets before removing the pistons.
- Disconnect the negative battery cable.
- Remove the oil pan. Refer to PAN, OIL, REMOVAL, 6.7L .
- Remove bolts (1) and the engine block stiffener.
- Remove bolt (2) and the oil jet (1).