LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (6.4L Engine (Service Information) 2500 Hd & 3500 Hd) >> Engine Block >> Seal, Crankshaft Oil, Front >> Removal >> Removal

Seal, Crankshaft Oil, Front: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Vibration Damper
GC0088068Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  3. Drain cooling system. Refer to STANDARD PROCEDURE .
  4. Remove upper radiator hose.
  5. Remove radiator shroud attaching fasteners.
  6. Remove radiator cooling fan and shroud. Refer to FAN, COOLING, ELECTRIC, REMOVAL or FAN, COOLING, VISCOUS, REMOVAL .
  7. Remove crankshaft damper bolt.
  8. Remove damper using Crankshaft Insert (special tool #8513A, Insert, Crankshaft) (2) and Three Jaw Puller (special tool #1023, Puller) (1). Refer to DAMPER, VIBRATION, REMOVAL  .
    Fig 2: Front Crankshaft Seal Removal
    GC0092146Courtesy of CHRYSLER GROUP, LLC
  9. Using Seal Remover (special tool #9071, Remover, Seal) (1), remove crankshaft front seal (2).
scientia non olet · About LEMON Manuals