Engine Specifications: Camshaft

WARNING: This page is about a different car, the 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

CAMSHAFT

DESCRIPTION	SPECIFICATION
	Metric	Standard
Bearing Journal Diameter
No. 1	58.2 mm	2.29 in.
No. 2	57.8 mm	2.28 in.
No. 3	57.4 mm	2.26 in.
No. 4	57.0 mm	2.24 in.
No. 5	43.633 mm	1.72 in.
Bearing To Journal Clearance Standard
No. 1	0.040 - 0.080 mm	.0015 -.003 in.
No. 2	0.050 -0.090 mm	0.0019 -.0035 in.
No. 3	0.040 - 0.080 mm	.0015 -.003 in.
No. 4	0.050 - 0.090 mm	0.0019 -.0035 in.
No. 5	0.040 - 0.080 mm	.0015 -.003 in.
Camshaft End Play	.080 - 0.290 mm	0.0031 - 0.0114 in.
Duration	290°
Valve Lift (@ zero lash)
Intake	12.0 mm	0.472 in.
Exhaust	11.70 mm	0.460 in.