LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (5.7L CNG Engine (Service Information) 2500HD) >> Engine Block >> Assembly, Variable Valve Timing, 5.7L >> Installation >> Installation

Assembly, Variable Valve Timing, 5.7L : Installation: Installation

WARNING: This page is about a different car, the 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Phaser Alignment Slot
GC0088051Courtesy of CHRYSLER GROUP, LLC
  1. Align the slot (2) in the phaser (1) with the dowel on the camshaft.
    Fig 2: Camshaft Phaser & Bolt
    GC0088050Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Never attempt to disassemble the camshaft phaser, severe engine damage could result.

  2. Position the phaser (2) in place and install phaser retaining bolt (1) and tighten to 122 N.m (90 ft. lbs.).
  3. Install the timing chain and sprockets. Refer to CHAIN AND SPROCKETS, TIMING, INSTALLATION, 5.7L  .
scientia non olet · About LEMON Manuals