Pipe, Exhaust Extension: Installation: 6.4L

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Band Clamp Nuts, Isolators & Muffler

Courtesy of CHRYSLER GROUP, LLC

NOTE: Hangers and isolators may vary depending on wheelbase and model.

Install the exhaust extension pipe and connect the hanger isolators (2) to the exhaust extension pipe.
Tighten extension pipe to Y-pipe band clamp nuts (1) to the proper. Refer to SPECIFICATIONS .
Install the muffler and tail pipe (3). Refer to MUFFLER, EXHAUST, INSTALLATION .
Check the exhaust system for contact with the body panels. A minimum of 25 mm (1.0 in.) is required between the exhaust system components and body/frame parts. Make the necessary adjustments, if needed.