6.7L Diesel Engine

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust System 6.7L Diesel Engine - Typical

Courtesy of CHRYSLER GROUP, LLC

1 - EXHAUST CLAMP

2 - EXHAUST PIPE GASKET

3 - FRONT EXHAUST PIPE

4 - FLANGE GASKET

5 - FLANGE NUT

6 - ISOLATOR

7 - DIESEL PARTICULATE FILTER (DEF)

8 - FLANGE GASKET

9 - FLANGE NUT

10 - ISOLATOR

11 - ISOLATOR

12 - SELECTIVE CATALYTIC REDUCTION (SCR)

13 - EXTENSION PIPE

14 - EXHAUST CLAMP

15 - TAIL PIPE

16 - ISOLATOR

The exhaust system must be properly aligned to prevent stress, leakage and body contact. Minimum clearance between any exhaust component and the body or frame is 25.4 mm (1.0 in.). If the system contacts any body panel, it may amplify objectionable noises from the engine or body.