Converter, Catalytic: Inspection: Inspection
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Look at the stainless steel body of the Catalytic Converter assembly, inspect for bulging or other distortion that could be a result of overheating. Inspect for:
- Indiction of exhaust gas leakage such as soot trails.
- Temperature sensor wiring for damage
- Joint misalignment
- Denting of greater then 6.3 mm (0.25 in.)
- Outer shell torn, cracked or otherwise damaged
- Loose or damaged core