LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Vehicle Quick Reference - 2500 Hd & 3500 Hd) >> Maintenance Schedules >> Description >> Maintenance Schedules - 3.0L Diesel Fuel - B6 To B20 Biodiesel >> Oil Change Indicator - Reset

Oil Change Indicator - Reset

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle is equipped with an engine oil change indicator system. The "Oil Change Required" message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.

To reset the oil change indicator system, refer to CENTER, ELECTRONIC VEHICLE INFORMATION, STANDARD PROCEDURE .

NOTE:

If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure.