Seat, Rear: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connector

Courtesy of CHRYSLER GROUP, LLC

NOTE:

60/40 bench seat shown in the illustration, solid bench seat similar.

Disconnect the electrical connector (1), if equipped.

Fig 2: Center Shoulder Belt
Courtesy of CHRYSLER GROUP, LLC
Remove the bolt (1) attaching the center shoulder belt (2) to the retractor and position the shoulder belt out of the way.

Fig 3: Rear Inner Belts & Buckles
Courtesy of CHRYSLER GROUP, LLC
Remove the rear outer bolts.
Remove the rear inner bolts (3) and buckles (2) as necessary.

Fig 4: Front Mounting Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the front fasteners (1).

Fig 5: CAB Hooks
Courtesy of CHRYSLER GROUP, LLC
Lift the seat assemblies up and separate the cab hooks (3) from the loops (1 and 2).
Remove the seat assemly from the vehicle.