Rear Dual Wheels
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle
- Remove the tire and wheel assembly.
- Remove the disc brake caliper. Refer to CALIPER, DISC BRAKE, REMOVAL .
- Remove the caliper adapter bolts.
- Remove the rear axle shaft from the housing on dual rear wheels, refer to SHAFT, AXLE, REMOVAL
or SHAFT, AXLE, REMOVAL
.
1 - HUB BOLTS 2 - SOCKETS - Remove the hub and rotor assembly.
- Disassemble the hub from the rotor if needed by removing the bolts (1).