LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 619 (5.7L - DTCS P257E To U1504 - 1500) >> Diagnosis And Testing >> U11A4-Lost Brake Pressure Sensor 2 Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) doesn't receive the Brake Pressure 2 message over the CAN C bus from the Anti-Lock Brake System (ABS) Module. The circuit is continuously monitored. One Trip fault.

scientia non olet · About LEMON Manuals