LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 618 (5.7L - DTCS P152C To P257D - 1500) >> Diagnosis And Testing >> P2122-Accelerator Pedal Position Sensor 1 Circuit Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects that the APP Sensor 1 input voltage is below the minimum acceptable value. Acceleration rate and Engine output are limited. One trip fault and the code will set within 5 seconds. ETC light is flashing

scientia non olet · About LEMON Manuals