LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (5.7L - DTCS B1810 To P0172 - 1500) >> Diagnosis And Testing >> C0543-Brake Pressure Sensor 2 Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) receives a message over the CAN BUS from the Anti-lock Brake System (ABS) Module that there is a fault with the Brake Pressure Sensor. One Trip Fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals