LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (3.6L - DTCS P2311 To U1504 - 1500) >> Diagnosis And Testing >> U1133-Lost Stop/Start Switch 1 Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) doesn't receive the Stop/Start Switch 1 message over the CAN C bus from the BCM for more than 2 seconds. The circuit is continuously monitored. One Trip fault.