LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (3.6L - DTCS P0532 To P141C - 1500) >> Diagnosis And Testing >> P0606-Internal Control Processor >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

When the Powertrain Control Module (PCM) recognizes an internal failure to communicate or the CMP and CKP Sensor count periods are too short. One trip fault. ETC light is flashing. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.