Diagnostic Test
WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR BCM CAN BUS DTCS
- With the scan tool, read BCM DTCs.
Are any BCM CAN BUS DTCs present?
Yes
- Refer to the DTC INDEX - 1500 and perform the appropriate diagnostic procedure. Perform the diagnostic procedure for DTC U0001-CAN C BUS first if the fault is present.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to PCM VERIFICATION TEST .
No
- Go To 2
- With the scan tool, read BCM DTCs.
- CHECK IF OCCUPANT RESTRAINT CONTROL (ORC) MODULE DTCS ARE PRESENT
- With the scan tool, read ORC DTCs.
Are any ORC DTCs present?
Yes
- Refer to the DTC INDEX - 1500 and perform the appropriate diagnostic procedure.
- Perform the POWERTRAIN VERIFICATION TEST. Refer to PCM VERIFICATION TEST .
No
- Replace the Powertrain Control Module (PCM) in accordance with the service information. Refer to REMOVAL .
- Perform the POWERTRAIN VERIFICATION TEST. Refer to PCM VERIFICATION TEST .
- With the scan tool, read ORC DTCs.