LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Occupant Restraint Controller (Orc) - Electrical Diagnostics) >> Diagnosis and Testing >> B212D-13-Ignition Run Only Input-Circuit Open >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This Diagnostic Trouble Code (DTC) sets when the ORC detects the voltage at least 4.8 volts on the Fused Ignition Run Control Output circuit for more than 15 seconds while the Fused Ignition Run/Start Control Output circuit remains below 9 volts. In the event the ORC detects voltage has returned to normal operating range and the Ignition Run only voltage feed is above 5 volts for a minimum of five seconds, this DTC immediately transitions to stored status.