LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (BW44-45 Transfer Case (Service Information) 1500) >> Removal >> Removal

Section 584 (BW44-45 Transfer Case (Service Information) 1500): Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case & Transmission
GC0143991Courtesy of CHRYSLER GROUP, LLC
  1. Raise vehicle.
  2. Drain transfer case lubricant.
  3. Mark front and rear propeller shafts for alignment reference.
  4. Support transmission with jack stand.
  5. Remove the transfer case skid plate, if equipped.
  6. Disconnect front and rear propeller shafts at transfer case.
  7. Disconnect transfer case shift motor and mode sensor wire connectors (3).
  8. Disconnect transfer case vent hose.
  9. Support transfer case with transmission jack.
  10. Secure transfer case to jack with chains.
  11. Remove nuts attaching transfer case (2) to transmission (1).
  12. Pull transfer case and jack rearward to disengage transfer case.
  13. Remove transfer case from under vehicle.
scientia non olet · About LEMON Manuals