LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 558 (Vehicle Theft Security (Service Information) 1500) >> Switch, Hood Ajar >> Installation >> Stand Alone Switch Striker

Stand Alone Switch Striker

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Switch Components
GC0086782Courtesy of CHRYSLER GROUP, LLC
  1. Position the stand alone hood ajar switch striker (3) over the mounting hole in the inner hood panel reinforcement (1).
  2. Using hand pressure, press the striker upward into the mounting hole in the inner hood panel until all three integral lock tabs (2) are fully engaged.
  3. Close and latch the hood.
scientia non olet · About LEMON Manuals