SENSOR, Crankshaft Position: Description: 5.7L
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CYLINDER BLOCK - RIGHT / REAR |
| 2 - ELECTRICAL CONNECTOR |
| 3 - MOUNTING BOLT |
| 4 - CKP SENSOR |
The Crankshaft Position (CKP) (4) sensor is mounted into the right rear side of the cylinder block. Refer to Fig 1. It is positioned and bolted into a machined hole.