INJECTOR(S), Fuel: Removal: 3.7L/4.7L
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - PLIERS |
| 2 - INJECTOR CLIP |
| 3 - FUEL INJECTOR - TYPICAL |
| 4 - FUEL RAIL - TYPICAL |
- Remove the fuel rail assembly. Refer to RAIL, Fuel , Removal for diesel, or RAIL, Fuel , Removal for gas.
- Using suitable pliers (1), remove the fuel injector retaining clip (2).
- Remove the fuel injector (3) from the fuel rail (4) using a side to side motion while pulling the injector out of the fuel rail assembly.