LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Fuel System) >> Fuel Delivery, 6.7L Diesel >> Specifications >> Torque Specifications - 6.7L

Torque Specifications - 6.7L

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION N.m Ft. Lbs. In. Lbs.
Air Intake Heater 24 18 -
Crankshaft Position Sensor 10 - 89
Engine Coolant Temperature Sensor 18 N.m - 159 In. Lbs.
Fuel Connector Nut at Cylinder Head 55 41 -
Fuel Control Actuator 24 18 -
Fuel Filler Hose Clamp at Tank 3 - 27
Fuel Filter Housing Cover 31 23 -
Fuel Filler Housing-to-Body Screws 2 - 18
Fuel Heater Element 2 - 18
Fuel Injector Bolts 5 N.m - 44 In. Lbs.
Step 2 10 N.m - 89 In. Lbs.
Fuel Injector Solenoid Nuts 1.25 - 11
Fuel Injection Pump Drive Gear Access Cover 8 - 71
Fuel Injection Pump Mounting Nuts 24 18 -
Fuel Injection Pump-to-Gear Shaft Nut 105 77 -
Fuel Line Banjo Fitting Bolts 24 18 -
Fuel Line Banjo Fitting Bolts at Fuel Filter Housing 24 18 -
Fuel Line Brace-to-Intake Manifold Cover Bolt (High-Pressure) 24 18 -
Fuel Line Fittings (High-Pressure - Pump to Rail) 40 30 -
Fuel Line Fittings (High-Pressure - Cylinder Head to Rail) 40 30 -
Fuel Pressure Limiting Valve (Banjo Bolt) 24 18 -
Fuel Pressure Limiting Valve (In Fuel Rail) 101 74 -
Fuel Pressure Sensor 70 52 -
Fuel Rail Mounting Bolts 24 18 -
Fuel Tank Mounting Straps (Mid-Ship) 41 30 -
High Pressure Connector Retaining Nut 15 - 133
Step 2 50 37 -
Intake Air Temperature Sensor 1 N.m - 9 In. Lbs.
Intake Manifold Bolts 24 18 -
Mass Air Flow Sensor 1 - 9
Map Sensor Screws 1 - 9
No. 6 Fuel Line Shield Bolts 43 32 -
Oxygen Sensor 41 30 -
Oxygen Sensor Module 6 - 53
Rear Engine Lift Bracket Bolts 77 57 -
Rear Fuel Tank Straps 55 41 -
Screened Quick Connect 27 20 -