Jet, Piston Oil Cooler: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Piston Oil Cooler Jet & Bolt

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Piston oil cooler jet for cylinders one/two shown in illustration. Piston oil cooler jets for cylinders three/four and five/six are similar.

Remove the crankshaft. Refer to CRANKSHAFT, REMOVAL .
Remove the bolt (1) and the piston oil cooler jet(s) (2) from the engine block.

Fig 2: Piston Oil Cooler Jet O-Ring Seal
Courtesy of CHRYSLER GROUP, LLC
Remove and discard the O-ring seal (1) from the piston oil cooler jet(s).