LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Fuel System - 1500) >> Fuel Delivery, Diesel >> Rail, Fuel >> Removal >> Right Fuel Rail

Right Fuel Rail

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL .
    Fig 1: Fuel Rail Pressure Sensor Connector
    GC0146823Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the fuel rail pressure sensor harness connector (1).
    Fig 2: Right Fuel Rail & Bolts
    GC0146821Courtesy of CHRYSLER GROUP, LLC
  4. Remove the right bank high pressure fuel tubes. Refer to TUBE(S), FUEL, REMOVAL .
  5. Remove bolts (2) the right fuel rail (1).